GT STORE

USB Plug-and-play microphone with -10dB Cardioid, Cardioid, and Omnidirectional pick-up patterns.

Optimal USB Streaming Microphone

The Sfera Pro is designed to be easy to use yet with high-quality condenser capsules so the audio is crisp & clear. It tailored to be the optimal streaming microphone with a variety of pickup patterns so the recording can be adjusted according to your personal environment. It is the ideal microphone from anything from gaming, online calls, & podcasts.

Features

Plug & Play easy to use
Boom arm attachable
Volume dial control
Pick-up patterns Cardioid, -10dB Cardioid, and Omnidirectional
Headphone jack
Mute button

Heavy Base

The Sfera Pro has a strong & heavy base to keep it stable where ever you place it. The cast metal is 0.4kg (0.88 lbs) with a coated rubber bottom to ensure its placement on your desk.

Pick-up Pattern: Cardioid

The Cardioid pick-up pattern is ideal for individual use, picking up the audio from the front of the microphone and not the back. This enhances the recorded audio by excluding any irrelevant noises behind the microphone.

Pick-up Pattern: Cardioid -10 dB

When you have very loud audio such as instruments the Cardioid -10dB reduces the sensitivity of the microphone so your sound stays crystal clear.

Pick-up Pattern: Omnidirectional

This pick-up pattern is for surround sound, picking up audio from all directions. This is very useful for when there are several people speaking or you want to move around in your recording space.

Cable Management

If you have a full streaming setup, cables can run everywhere if unorganized. The Sfera Pro has a cable management clip attached so the cable stays tightly connected to the microphone’s stand.

Headphone Jack

The Sfera Pro has a 3.5mm headphone jack on the back side of the microphone so you have the ability to plug in your headphones.

Mute Function

Need to quickly mute your microphone? Simply press the Mute Button to immediately mute the microphone so you don’t have to fumble in your audio settings.

Boom Arm Mount

No room on your desk for the Sfera Pro? Attach it to a boom arm that has a 5/8-inch thread mount so you can have more room on your desk.

Plug & Play

The simplistic design makes it easy to use. With the Plug & Play function, the Sfera Pro is ready to go by plugging in the Custom USB cable to your PC or Mac. All you need to do is adjust the volume dial on the Sfera Pro to find the right settings for your headphones.

Spécifications

Headphone Amplifier

Dimensions

System Requirements

Power Required/Consumption

5V 500mA (USB)

Sample Rate

44.1kHz or 48kHz

Bit Rate

16bit

Capsule

2 high quality 14mm condenser capsules

Polar Pattern

Cardioid, Cardioid -10dB, Omnidirectional

Frequency Response

20Hz – 20kHz

Sensitivity

44dB±3dB (1 kHz)

Max SPL

120dB (THD: 1% 1kHz)

Impedance

>16 ohms

Power Output (RMS)

130mW

THD

0.009%

Frequency Response

15Hz – 22kHz

Signal to Noise

114dB

Thread Mount

5/8 inches

Microphone diameter

9.5 cm

3.74 inches

Stand height

13 – 18 cm

5.12 – 7.09 inches

Weight (microphone)

0.36 kg

0.79 lbs

Weight (stand)

0.4 kg

0.88 lbs

Cable: L-type shielded USB Cable

190 cm

6.23 feet

Box Dimensions

26.2 x 16.1 x 14.5 cm

10.31 x 6.34 x 5.71 inches

Gross Weight

1.2 kg

2.65 lbs

Windows Vista, XP Home Edition or XP Professional, Windows 7, Windows 8 and 8.1, Windows 10

USB

2.0 High Speed; 256 MB RAM (minimum)

Macintosh

Mac OSX (10.6.4 or higher)

USB