GIGABYTE B760M Gaming X AX DDR4
TECH SPECS
-
CPU
-
LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
-
L3 cache varies with CPU
(Please refer "CPU Support List" for more information.)
-
Chipset
-
Intel® B760 Express Chipset
-
Memory
-
Support for DDR4 5333(O.C.)/ 5133(O.C.)/ 5000(O.C.)/ 4933(O.C.)/ 4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/ 4266(O.C.)/ 4133(O.C.)/ 4000(O.C.)/ 3866(O.C.)/ 3800(O.C.)/ 3733(O.C.)/ 3666(O.C.)/ 3600(O.C.)/ 3466(O.C.)/ 3400(O.C.)/ 3333(O.C.)/ 3300(O.C.)/ 3200/ 3000/ 2933/ 2666/ 2400/ 2133 MT/s memory modules
-
4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
-
Dual channel memory architecture
-
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
-
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
-
Support for Extreme Memory Profile (XMP) memory modules
(Please refer "Memory Support List" for more information.)
Integrated Graphics Processor-Intel® HD Graphics support:
-
1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
* Support for DisplayPort 1.2 version and HDCP 2.3
-
1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.0 version and HDCP 2.3.
(Graphics specifications may vary depending on CPU support.)
-
Audio
-
Realtek® Audio CODEC
-
High Definition Audio
-
2/4/5.1/7.1-channel
* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
-
Support for S/PDIF Out
-
LAN
-
Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
-
Wireless Communication module
AMD Wi-Fi 6E RZ608 (MT7921K) (PCB rev. 1.0)
-
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
-
BLUETOOTH 5.2
-
Support for 11ax 80MHz wireless standard and up to 1.2 Gbps data rate
Intel® Wi-Fi 6E AX210 (PCB rev. 1.1)
-
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
-
BLUETOOTH 5.3
-
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
Intel® Wi-Fi 6E AX211 (PCB rev. 1.2/PCB rev. 1.4)
-
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
-
BLUETOOTH 5.3
-
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
Realtek® Wi-Fi 6E RTL8852CE (PCB rev. 1.3)
-
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
-
BLUETOOTH 5.3
-
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
(Actual data rate may vary depending on environment and equipment.)
CPU:
-
1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
Chipset:
-
1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
CPU:
-
1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
Chipset:
-
1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
-
4 x SATA 6Gb/s connectors
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
Chipset:
-
1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
-
5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
-
1 x USB 2.0/1.1 port on the back panel
Chipset+2 USB 2.0 Hubs:
-
8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
-
Internal I/O Connectors
-
1 x 24-pin ATX main power connector
-
1 x 8-pin ATX 12V power connector
-
1 x CPU fan header
-
3 x system fan headers
-
2 x addressable LED strip headers
-
2 x RGB LED strip headers
-
2 x M.2 Socket 3 connectors
-
4 x SATA 6Gb/s connectors
-
1 x front panel header
-
1 x front panel audio header
-
1 x S/PDIF Out header
-
1 x USB Type-C® header, with USB 3.2 Gen 2 support
-
1 x USB 3.2 Gen 1 header
-
2 x USB 2.0/1.1 headers
-
2 x Thunderbolt™ add-in card connectors
-
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
-
1 x serial port header
-
1 x reset button
-
1 x Q-Flash Plus button
-
1 x reset jumper
-
1 x Clear CMOS jumper
-
3 x USB 3.2 Gen 1 ports
-
5 x USB 2.0/1.1 ports
-
2 x SMA antenna connectors (2T2R)
-
1 x HDMI 2.0 port
-
1 x DisplayPort
-
1 x RJ-45 port
-
3 x audio jacks
-
iTE® I/O Controller Chip
-
Voltage detection
-
Temperature detection
-
Fan speed detection
-
Water cooling flow rate detection
-
Fan fail warning
-
Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.
-
1 x 256 Mbit flash
-
Use of licensed AMI UEFI BIOS
-
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
-
Support for GIGABYTE Control Center (GCC)
* Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
-
Support for Q-Flash
-
Support for Q-Flash Plus
-
Norton® Internet Security (OEM version)
-
LAN bandwidth management software
-
Support for Windows 11 64-bit
-
Support for Windows 10 64-bit
-
Micro ATX Form Factor; 24.4cm x 24.4cm
-
Back Panel Connectors
-
I/O Controller
-
H/W Monitoring
-
BIOS
-
Unique Features
-
Bundled Software
-
Operating System
-
Form Factor
About this item
-
Intel LGA 1700 Socket: Supports 13th and 12th Gen Intel Core Series Processors
-
DDR4 Compatible: Dual Channel DDR4, 4 DIMMs
-
Sturdy Power Design: 8+1+1 Phases Hybrid Digital VRM Design with 60A DrMOS
-
Comprehensive Thermal Design: Fully Covered MOSFET Heatsinks, M.2 Thermal Guard
-
Next Gen Connectivity: PCIe 4.0, Dual NVMe PCIe 4.0 x4 M.2, Front USB 3.2 Gen 2 Type-C
-
Fast Networking: 2.5GbE LAN, Wi-Fi 802.11ax
-
Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED & RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPU
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. GTstore.pk cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold.
|