Specifications
-
LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*
-
L3 cache varies with CPU
* Please refer to "CPU Support List" for more information.
-
Chipset
-
Intel® Z790 Express Chipset
-
Memory
-
Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
-
4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
-
Dual channel memory architecture
-
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
-
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
-
Support for Extreme Memory Profile (XMP) memory modules
(Please refer "Memory Support List" for more information.)
Integrated Graphics Processor-Intel® HD Graphics support:
-
1 x USB Type-C® port, supporting USB 3.2 Gen 2 and DisplayPort video outputs and a maximum resolution of 4096x2304@60 Hz
* Support for drawing tablets and 20V@3A of power delivery.
* Support for DisplayPort 1.4 version and HDR.
-
1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.0 version and HDCP 2.3.
(Graphics specifications may vary depending on CPU or graphics card support.)
Intel® Wi-Fi 6E AX211
-
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
-
BLUETOOTH 5.3
-
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
(Actual data rate may vary depending on environment and equipment.)
CPU:
-
1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
* The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU connector
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
Chipset:
-
1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
-
1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
CPU:
-
1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU)
-
1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
Chipset:
-
1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB)
-
1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
-
1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
-
4 x SATA 6Gb/s connectors
RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
Chipset:
-
2 x USB Type-C® ports, with USB 3.2 Gen 2x2 support (1 port on the back panel, 1 port available through the internal USB header)
-
1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support
-
2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
-
2 x USB 3.2 Gen 1 ports available through the internal USB header
-
2 x USB 2.0/1.1 ports on the back panel
Chipset+USB 3.2 Gen 1 Hub:
-
4 x USB 3.2 Gen 1 ports on the back panel
Chipset+USB 2.0 Hub:
-
4 x USB 2.0/1.1 ports available through the internal USB headers
-
Internal I/O Connectors
-
1 x 24-pin ATX main power connector
-
1 x 8-pin ATX 12V power connector
-
1 x 4-pin ATX 12V power connector
-
1 x CPU fan header
-
1 x water cooling CPU fan header
-
4 x system fan headers
-
2 x system fan/water cooling pump headers
-
2 x addressable LED strip headers
-
2 x RGB LED strip headers
-
5 x M.2 Socket 3 connectors
-
4 x SATA 6Gb/s connectors
-
1 x front panel header
-
1 x front panel audio header
-
1 x USB Type-C® header, with USB 3.2 Gen 2x2 support
-
1 x USB 3.2 Gen 1 header
-
2 x USB 2.0/1.1 headers
-
1 x noise detection header
-
2 x Thunderbolt™ add-in card connectors
-
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
-
1 x serial port header
-
1 x Q-Flash Plus button
-
1 x reset button
-
1 x reset jumper
-
2 x temperature sensor headers
-
1 x Clear CMOS jumper
-
Back Panel Connectors
-
2 x USB 2.0/1.1 ports
-
2 x SMA antenna connectors (2T2R)
-
4 x USB 3.2 Gen 1 ports
-
1 x DisplayPort In port
-
1 x HDMI 2.0 port
-
2 x USB 3.2 Gen 2 Type-A ports (red)
-
1 x USB Type-C® port, with USB 3.2 Gen 2x2 support
-
1 x USB Type-C® port (DisplayPort), with USB 3.2 Gen 2 support
-
1 x RJ-45 port
-
1 x optical S/PDIF Out connector
-
2 x audio jacks
-
I/O Controller
-
iTE® I/O Controller Chip
-
H/W Monitoring
-
Voltage detection
-
Temperature detection
-
Fan speed detection
-
Water cooling flow rate detection
-
Fan fail warning
-
Fan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
-
Noise detection
-
BIOS
-
1 x 256 Mbit flash
-
Use of licensed AMI UEFI BIOS
-
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
-
Unique Features
-
Support for GIGABYTE Control Center (GCC)
* Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
-
Support for Q-Flash
-
Support for Q-Flash Plus
-
Support for Smart Backup
-
Bundled Software
-
Norton® Internet Security (OEM version)
-
LAN bandwidth management software
-
Operating System
-
Support for Windows 11 64-bit
-
Support for Windows 10 64-bit
-
Form Factor
-
ATX Form Factor; 30.5cm x 24.4cm
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. GTstore.pk cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold.
|